Windows 11 Esxi: Difference between revisions
Jump to navigation
Jump to search
(Created page with " on isntall : Time to work around the issue… 1. When you get the error picture above simply press Shift + F10 and this will bring up a dos prompt. 2. Type regedit and hit enter. 3. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\Setup and create a new Key called: LabConfig 4. Create inside the LabConfig Key a ByPassTPMCheck DWORD (32-bit) with the value of 1 Click OK after editing the value data and then close out of all of the screens. Once you click on the red x in the cor...") |
No edit summary |
||
| Line 5: | Line 5: | ||
1. When you get the error picture above simply press Shift + F10 and this will bring up a dos prompt. | 1. When you get the error picture above simply press Shift + F10 and this will bring up a dos prompt. | ||
2. Type regedit and hit enter. | 2. Type regedit and hit enter. | ||
3. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\Setup and create a new Key called: LabConfig | 3. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\Setup and create a new Key called: LabConfig | ||
4. Create inside the LabConfig Key a ByPassTPMCheck DWORD (32-bit) with the value of 1 | 4. Create inside the LabConfig Key a ByPassTPMCheck DWORD (32-bit) with the value of 1 | ||
Click OK after editing the value data and then close out of all of the screens. Once you click on the red x in the corner of the setup screen, the setup will start again and ignore the TPM requirements. | Click OK after editing the value data and then close out of all of the screens. Once you click on the red x in the corner of the setup screen, the setup will start again and ignore the TPM requirements. | ||
Revision as of 09:56, 8 April 2025
on isntall :
Time to work around the issue…
1. When you get the error picture above simply press Shift + F10 and this will bring up a dos prompt.
2. Type regedit and hit enter.
3. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\Setup and create a new Key called: LabConfig
4. Create inside the LabConfig Key a ByPassTPMCheck DWORD (32-bit) with the value of 1
Click OK after editing the value data and then close out of all of the screens. Once you click on the red x in the corner of the setup screen, the setup will start again and ignore the TPM requirements.